Quick and Easy Adjustable Pleated Crib Skirt

Wednesday, February 13, 2013




A lot of customers ask me if it is worth it to make a crib skirt. I always answer that it depends on the crib.  For Braelyn's crib, I made a skirt, and it looked great for the first 5 months of her life when the mattress was raised to its highest position. As soon as we lowered her mattress, you could no longer see it. Her crib has a thick wood panel on the front where the skirt lays, so the skirt became pointless. Mackenzie's crib is a Jenny Lind style crib and is very open; you will be able to see the skirt at all levels.
Knowing this, I wanted to make a skirt that easily adjusts with the mattress. I have made crib skirts in the past, and it takes rehemming to fix them to the new mattress height.  I hate hemming, so the idea of going back to a completed project in less than a year is not appealing to me. I knew there had to be a better way.

There are a lot of tutorials and blogs about making adjustable crib skirts. I have seen so many different concepts, including tutorials with ties, buttons, folds, Velcro, etc. My favorite post is on View Along the Way's blog. I followed Kelly's directions for the most part and really enjoyed all of her pictures and honest descriptions. The only major difference in her skirt and mine is that I added a pleat. I like the pleated look much better than just a flat panel.  I also used clips to attach it to the springs (her suggestions) rather than tacks.

Here are the steps to adding the pleat.

1. Measure your crib.

  •  My dimensions


    • Front and back width = 51.5" 
    • Side width =  27.5"
    • Height (Floor to highest mattress setting) =  19"
2. Cut your fabric. 
The best part of a 19" height is that a 44/45" bolt is perfect for making two panels; just cut down the fold. You will get two pieces with a 22" height. I bought 2 7/8 yards of fabric for my crib. I have 2 panels here because my crib is floating in the room; you really only need 1 front panel if you are pushing it up against a wall. If you are, then just make the three panels (front and 2 sides) and you could potentially buy just 1 7/8 yards, but you will have a seam under your pleat down the middle of the front panel. 
  • Side Panels - 
    • Hemming: add 2" to width and 2" to height for hemming = 21" x 31.5"


    • I bought 7/8 yard of fabric (31.5") for both panels.
      • I wanted to make it easy, so I just cut down the fold and cut the selvage off the bottom giving me two 22" x 31.5" pieces. 
  • Front Panels- 


    • Hemming: add 2" to width and 2" to height for hemming = 21" x 55.5" + Pleat
    • For a pleat, add double the width of your pleat. I wanted to make an even cut with yardage, so 55.5" gave me 1 yard (36") and 19.5" left over. I added 16.5" to make an 8.25 wide pleat. That means I needed 2 yards to make both panels. Again, if you are making just one panel you can buy 1yard, cut it down the fold, and sew a seam down the middle. Use a .25" seam and use an 8" wide pleat. 
    • My final panels were 22" x 72". 
3. Hem your sides.
  • I like to hem the sides first. I turned under each side .5" twice and top stitched them. 
4. Hem the bottoms.
  • It is much easier to do the bottom hem before you create the pleat. 
  • I used a 1" hem on the bottom because I like the look of a thick hem on the bottom. You could even use a blind hem if you do not want to see a top stitch. 
5. Create the pleat.


  • Find center and mark your pleat folds 8.25" (or how big you made your pleat) on each side of center mark. 
  • Fold your pleat in and press.
  • Pin or clip down pleat on both the bottom and top. 
  • Sew a stitch .25? from the top edge to keep pleat.
6. Finish top edges.
  • I used a zig zag to finish the top edges. Normally, I would use a serger but the zig zag worked well. 
You should now have 4 finished panels!!!!

That's it; now just clip or pin them to your crib. I used wonder clips to attach them, and they worked great. Once Mackenzie is old enough and I have to move the mattress down, I will just move the clipped edges in farther. I am very excited about how fast and how easy it was to make this skirt. It was much easier than the traditional crib skirt I made before and it took much less fabric. 














2 comments:

  1. How did you work around the diagonal metal pieces that connect the mattress support to the crib frame? I have the same crib and am just now realizing that you can't use a standard crib skirt with this. Also, since you created 3 difference pieces do you not see a gap at the corners?

    ReplyDelete

  2. savannah cat for sale
    savannah kitten
    f1 savannah cat for sale
    savannah cat price
    savannah cats for sale
    savannah kittens for sale, serval cat for sale, savannah cat for sale, savannah cats for sale, f1 savannah cat for sale, serval cat for sale, exotic cats for sale, f1 savannah cat, f4 savannah cat, cats for sale, savannah cats, Serval kittens for sale, savannah kittens for sale near me, savannah cats for sale near me, bengal kittens for sale, bengal kittens for sale near me.

    ReplyDelete

 
Design by Studio Mommy (© Copyright 2015)